This is a replacement of Carburetor O-ring Kit, and is intended for use with Alpha Dragon II, III, IV, IVBC, V, GT, GT-RㄝFALCON 隼 carburetor.
This is a replacement of 3 Port Piston & Sleeve Set and is intended for use with Alpha 21RTR engine. We recommend that when you replace the piston/sleeve on any engine, you also change the connecting rod and wrist pin clips.
This is a replacement of Medium Speed Needle and is intended for use with Alpha Dragon II, III, IV, V, GT, GT-R engine.
This is a replacement of Carburetor Venturi Set, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of Carburetor Venturi, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of Carburetor Venturi, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of Carburetor Retainer and is intended for use with Alpha 21RTR, 28RTR engine.
This is a replacement of Backplate and is intended for use with Alpha A872, A352, Club Racer engine.
This is a replacement of Crankcase, and is intended for use with Alpha 28RTR5PD engine.
This is a replacement of Conrod and is intended for use with Alpha Dragon III, IV, V, GT, GT-R engine. The connecting rod attaches between the crankshaft and the piston. If you are replacing the piston/sleeve in your engine, it is always a good idea to replace the connecting rod at the same time to avoid premature failure due to wear.
This is a replacement of Crankcase, and is intended for use with Alpha A352 engine.
This is a replacement of Carburetor O-ring Kit, and is intended for use with Alpha A872, A352, Club Racer, T850, 21RTR, 28RTR carburetor.
This is a replacement of Carburetor O-ring Kit, and is intended for use with Alpha Dragon II, III, IV, IVBC, V, GT, GT-RㄝFALCON 隼 carburetor.
This is a replacement of 3 Port Piston & Sleeve Set and is intended for use with Alpha 21RTR engine. We recommend that when you replace the piston/sleeve on any engine, you also change the connecting rod and wrist pin clips.
This is a replacement of Medium Speed Needle and is intended for use with Alpha Dragon II, III, IV, V, GT, GT-R engine.
This is a replacement of Carburetor Venturi Set, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of Carburetor Venturi, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of Carburetor Venturi, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of Carburetor Retainer and is intended for use with Alpha 21RTR, 28RTR engine.
This is a replacement of Backplate and is intended for use with Alpha A872, A352, Club Racer engine.
This is a replacement of Crankcase, and is intended for use with Alpha 28RTR5PD engine.
This is a replacement of Conrod and is intended for use with Alpha Dragon III, IV, V, GT, GT-R engine. The connecting rod attaches between the crankshaft and the piston. If you are replacing the piston/sleeve in your engine, it is always a good idea to replace the connecting rod at the same time to avoid premature failure due to wear.
This is a replacement of Crankcase, and is intended for use with Alpha A352 engine.
This is a replacement of Carburetor O-ring Kit, and is intended for use with Alpha A872, A352, Club Racer, T850, 21RTR, 28RTR carburetor.
English
簡體中文