This is a replacement of Carburetor Lower O-ring, and is intended for use with Alpha A872, A352, Club Racer, T850, 21RTR, 28RTR carburetor.
This is a replacement of Fuel Inlet with two included gasket washers, and is intended for use with Alpha A872, A352, Club Racer, T850, 21RTR, 28RTR engine.
This is a replacement of 3 Port Piston, Sleeve & Conrod Set and is intended for use with Alpha Dragon IV, GT-R engine. This package includes not only the piston and sleeve, but also the connecting rod, wrist pin and wrist pin clips.
This is a replacement of Head Shim and is intended for use with Alpha A352 engine.
This is a replacement of Carburetor Venturi, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of 3 Port Piston, Sleeve & Conrod Set and is intended for use with Alpha Dragon III, GT engine. This package includes not only the piston and sleeve, but also the connecting rod, wrist pin and wrist pin clips.
This is a replacement of Crankcase, and is intended for use with Alpha Club Racer engine.
This is a replacement of Fuel Inlet with two included gasket washers, and is intended for use with Alpha Dragon II, III, IV, V, GT, GT-R engine.
This is a replacement of Crankcase, and is intended for use with Alpha T850 engine.
This is a replacement of Conrod and is intended for use with Alpha A872, A352, Club Racer, T850, Lutz, Lutz WS, A852, F850, S852, Z852, Dragon II, 5P PLUS, 21RTR, 28RTR engine. The connecting rod attaches between the crankshaft and the piston. If you are replacing the piston/sleeve of your engine, it is always a good idea to replace the connecting rod at the same time to avoid premature failure due to wear.
This is a replacement of Carburetor Venturi O-ring, and is intended for use with all Alpha Carburetor Ventur.
This is a replacement of Carburetor Ball Link & Screw, and is intended for use with the Dragon II, III, IV, IVBC, V, GT, GT-R, A872, A352, Club Racer, T850, 28RTR engine.
This is a replacement of Carburetor Lower O-ring, and is intended for use with Alpha A872, A352, Club Racer, T850, 21RTR, 28RTR carburetor.
This is a replacement of Fuel Inlet with two included gasket washers, and is intended for use with Alpha A872, A352, Club Racer, T850, 21RTR, 28RTR engine.
This is a replacement of 3 Port Piston, Sleeve & Conrod Set and is intended for use with Alpha Dragon IV, GT-R engine. This package includes not only the piston and sleeve, but also the connecting rod, wrist pin and wrist pin clips.
This is a replacement of Head Shim and is intended for use with Alpha A352 engine.
This is a replacement of Carburetor Venturi, and is intended for use with Alpha .21-.28 carburetor, except RTR engine.
This is a replacement of 3 Port Piston, Sleeve & Conrod Set and is intended for use with Alpha Dragon III, GT engine. This package includes not only the piston and sleeve, but also the connecting rod, wrist pin and wrist pin clips.
This is a replacement of Crankcase, and is intended for use with Alpha Club Racer engine.
This is a replacement of Fuel Inlet with two included gasket washers, and is intended for use with Alpha Dragon II, III, IV, V, GT, GT-R engine.
This is a replacement of Crankcase, and is intended for use with Alpha T850 engine.
This is a replacement of Conrod and is intended for use with Alpha A872, A352, Club Racer, T850, Lutz, Lutz WS, A852, F850, S852, Z852, Dragon II, 5P PLUS, 21RTR, 28RTR engine. The connecting rod attaches between the crankshaft and the piston. If you are replacing the piston/sleeve of your engine, it is always a good idea to replace the connecting rod at the same time to avoid premature failure due to wear.
This is a replacement of Carburetor Venturi O-ring, and is intended for use with all Alpha Carburetor Ventur.
This is a replacement of Carburetor Ball Link & Screw, and is intended for use with the Dragon II, III, IV, IVBC, V, GT, GT-R, A872, A352, Club Racer, T850, 28RTR engine.
English
簡體中文