English
中文版
   
NEWS & EVENTS
 
2018.1.31
  Limited Edition Set- 300 sets worldwide
 
   
2018.2.6
  Welcome Adrien Brens
 
   
2018.1.31
  4 Shoe Clutches Set & Tool Introduction
 
   
2018.1.31
  Dragon IV Introduction
 
   
2018.1.30
  Alpha Plus and X-Factory UK Welcomes Jack Embling
 
   
2018.1.24
  Father and son with Alpha for year 2018!! 
 
   
2018.1.23
  All good. Next time we'll be better!
 
   
2018.1.17
  Welcome Lewis Jones on board
 
   
2017.12.20
  Congrats to Diogo Chaves
 
   
2017.12.14
  Congrats to Kenneth Pope
 
   
 
Dragon IV Introduction 2018/1/31
   
The new Alpha engine, the Dragon IV, is a pre broken-in, 3 port engine designed to the highest specification. The Dragon IV continues with the Dragon III’s benefit of being easy to tune and within 2-4 tanks, be ready to race.
 
With the new engine, we are able to improve the following items.
 
The crankcase has been redesigned to improve the efficiency of intake and exhaust, the flow of fuel from the carburetor to the combustion chamber, and this results in less losses and greater fuel efficiency, furthermore, an increase in engine power .
 
Ceramic bearings: Reduced friction, lower weight, improved longevity.
The high quality material ceramic bearings are fitted as standard to the Dragon IV, and with less drag, more energy can be applied to the wheels. It’s reduced friction, lower weight for reducing the drag, and increasing the engine power and the speed-up function.
 
DEC Crankshaft: Reduced engine vibration, resist wear, good lubricity.
The new version of DEC Crankshaft, has the Alpha Patent – Dynamic Equilibrium, which can efficiently balance the inertial force from piston pin, from conrod, and from crankshaft rotation, to reduce the vibration of engine and to increase the engine power. The timing on the crankshaft has been altered for more power and a more linear power delivery has been achieved when combined with the new piston and liner.
 
Piston/Sleeve:
Redesign air intake can provide the fuel efficiency, more power and a more linear power been delivered.
 
Piston Pin:  The piston pin improves the hardness surface and the durability in order to reduce the possibility of bending, also made very light.
 
Cooling head: the new cooling head adds one more layer, but has been lowered for improved center of gravity in order to handling of the car, whilst keeping good natural cooling effects when positioned in car.
 
 
 
 

 

 
 
ALPHA PLUS MODEL CO., LTD.
No.110-8, Minsheng Rd., Shengang Township, Taichung County 429, Taiwan (R.O.C.)
Copyright © 2009 ALPHA PLUS MODEL CO., LTD.      All Rights Reserved.